Model M15-25
Part Number:  M15-25

Price $4,493
The M15-25 is Mentor Radio’s most powerful base radio. Suitable for ARINC channels, It can be configured for up to 6 channels in either Transceiver operation or Receive only modes. The M15-25 is a rugged rack mounted base station radio.  With 25 watts of carrier power (about 100 watt Peak Envelope Power—PEP) the M15-25 has plenty of power to reach out to the radio horizon. The M15-25 receives and transmits amplitude modulated (AM) signals designed to operate in the 118 to 137 MHz aviation band. Equipped with mounting flanges for installation into a standard 19 inch equipment rack for remote operation. The M15-25 also comes with a aesthetic case for use in desktop installations. Download additional information for Owners Manual, Brochure, Application Notes.  Do you have questions about Remote Controls?

Features

SPECIFICATIONS

RECEIVER
Audio 5 watts into 4 ohm speakers
Sensativity < 3uv with a 1KHz signal @ 50% modulation.
Bandwidth 25 KHz
Power Required 115VAC or 230 VAC (Switch selectable on rear panel)
IF Frequency 10.7MHz
TRANSMITTER
Frequency Center frequency 0.002%
Power 25 watts carrier, approx. 100 watts PEP

  • Standard 19” rack mount

  • 25 watt transmitter carrier power (100 watt PEP)

  • Built in power supply and speaker.  Operate from standard 120 VAC power.

  • N-type RF coax connector to allow connection to any 50 ohm coax transmission line.

  • Remote control interface for use with either local remote or tone remote controllers.

  • Standard 3/16" microphone jack.  This is a tried and true microphone interface.

ACCESSORIES

Mentor Radio offers a wide assortment of accessories to provide a complete installation solution.

 

Remote control units and remote control interface products, coax and remote cables.

Two antennas are available for this base unit.  

 

For a single channel radio we offer a type 526 ASP7A and for multiple channels we recommend the wide band 514 AV-1 antenna.

 

Two styles of local control microphones to choose from.  A handheld noise canceling mic and a 517 pedestal style microphone. Simple plug either microphone into the front panel jack and you’re ready to talk.