RADIO CONTROLS

Model

 Application

Power Input

 

Band

List Price

M2115RCU-BNC

 Indoor Use, No Case, Includes Antenna Adapter DC:  10-30v    AC:  115VAC or     230VAC Aviation -  VHF  Marine    - VHF

$649

M2115RCU-ALC

 Indoor Use, Includes Aluminum Case and Antenna Adapter DC:  10-30v   AC:  115VAC or     230VAC

Aviation -  VHF  Marine    - VHF

$699

M2115RCU-STC

 Outdoor Use, Includes Steel NEMA 4 Case   DC:  10-30v     AC:  115VAC or     230VAC

Aviation -  VHF  Marine    - VHF

$729

M2115RCU-FGC

 Outdoor Use, Includes Fiberglass NEMA 4 Case DC:  10-30v    AC:  115VAC or     230VAC Aviation -  VHF  Marine    - VHF

$779

M15RCUFAA

  

115 VAC

Aviation - VHF

Contact RBI

Model M2115RCU  ( Download Brochure   Owners Manual )

510 FAA certified unit

The M2115RCU is available in two different versions. The basic M2115RCU is designed to operate in the aviation VHF band (118-137MHz) while the M2115RCU-M operates in the marine VHF band (155-157MHz).

Two basic configurations are available depending on your installation requirements. The Base Unit comes with or without a small aluminum case which is great for indoor installations where space is the primary concern. The standard configuration is for outdoor operation and comes with either steel or fiberglass NEMA enclosures. Each radio control unit comes with one relay. Additional relays may be purchased separately.  The M2115RCU is suitable our outdoor operation in temperatures from +85 degrees C to -40 degrees C. 

Features:

  • Can be configured for one, two or three relays.

  • Sensitivity adjustment potentiometer

  • Test button to test controller circuits and relay operation.

  • 8-position Dip Switch to set configuration options.

  • 8 different time out values up to 1 hour.  (Also available in 8 hr and 12 hour time outs.)

  • Relay status LED’s.

  • factory configured power from any source available from AC (Operates from 115VAC or 230VAC) or DC (operates from 10 volts to 12V or 24V battery or solar panel)

  • Relays automatically re-energized when power is restored after power loss

  • Channel spacing of 25 KHz for USA use  and 8.33 KHz for use in Europe

  • Field programmable operating frequency using included Windows 7, Vista, and XP compatible software.

Specs:

Frequency Range:  118.000 to 136.975 MHz aeronautical band 156.050 to 157.425 MHz Marine

Sensitivity adjustment (<5uv to > 10,000 uv)

Antenna Connector:  (Aluminum Case:  BNC connector, NEMA-4 enclosure has SO-239 connector. Both are 50 ohms)

 

 

Built exclusively for Reginald Bennett International, Inc.

the M15RCUFAA has the following features:

  • Meets requirements for FAA certified L-854 equipment per AC150-5349-49C

  • Can be configured for one, two or three relays.

  • Sensitivity adjustment

  • Test button to test controller circuits and relay operation.

  • 8-position Dip Switch to set configuration options.

  • 8 different time out values up to 1 hour.  (Also available in 8 hr and 12 hour time outs.)

  • Relay status LED’s.

  • Power from 115VAC (only the M2115RCU can operate from 115VAC or 230VAC), 12 or 24V battery or solar panel

  • Power status indication built into the power LED.

  • Not limited to runway lights.  Do you fly home?

  • How about a personal aircraft garage door opener?
AVIATION BAND MARINE BAND

The aviation band units were originally designed to meet the requirements of the Federal Aviation Administration's Airport Runway Lighting Control program.  The concept from it's inception was to allow pilots to operate remote airfield runway lights from the aircraft where ground crews may not be available to monitor and control the lighting for night operations. Over time this equipment has found many additional uses including opening and closing hanger doors and operate other airfield equipment all without ground crew intervention or otherwise requiring the exiting of the aircraft.

 

Marine band version allows boat operators to operate horns, lights and other waterway markers from inside the vessel.

These units are in use by both the US and Canadian Coast Guard for waterway navigational aids.

Install with optional NEMA enclosures, three styles of antennas and several different power source options.

Two types of antennas are recommended for radio controls.  For installations where the unit is located indoors and the antenna needs to be mounted outdoors we suggest a base style antenna like the ASP7A and for installations utilizing NEMA 4 enclosures like the one used for the M15RCUFAA , we recommend connecting a whip antenna, as well as, if the unit is mounted on a solar panel and for self contained installations. Of course the ASP7A type antenna can be set-up anywhere to maximize antenna reception performance and minimize interference.